塑料（PVC）防护手套
1, plastic (PVC) protective gloves
该类手套要使用不会引起皮肤过敏、发炎的原料制作，手套双侧的厚度不小于0.6mm，不允许漏气。
The gloves should be made of raw materials that do not cause skin
allergy and inflammation. The thickness of gloves is not less than 0.6mm
on both sides, and air leakage is not allowed.
2、乳胶防护手套
2. Latex protective gloves
此类手套不允许漏气，表面无明显裂痕、气泡、杂质等缺陷。
Such gloves do not allow air leakage, and there are no obvious cracks, bubbles, impurities and other defects on the surface.
3、橡胶防护手套
3. Rubber protective gloves
此类手套不能含有再生胶和油膏，表面必须无裂痕、折缝、发粘、喷霜、发脆等缺陷，除了硫化配料和其他配合剂外，胶料的含量要占总质量的70%以上。
This kind of gloves can not contain regenerated glue and ointment, and
the surface must have no cracks, cracks, stickiness, spray frost and
embrittlement. In addition to vulcanizing ingredients and other
additives, the content of the rubber is more than 70% of the total
quality.
4、帆布防护手套
4, canvas protective gloves
帆布手套分为五指、三指和二指三种。缝制的针码为每厘米4-5针，帆布的质量不小于380g/m2。
Canvas gloves are divided into five fingers, three fingers and two
fingers three kinds. The stitched stitches are 4-5 stitches per
centimeter, and the quality of canvas is not less than 380g/m2.
5、白纱防护手套
5. White yarn protective gloves
白纱手套分为平口和罗口两种。
White gauze gloves are divided into two kinds: flat mouth and roll mouth