第一步：生产原料准备工作。在生产PVC手套之前，需要先进行配料，也就是将PVC手套的几种主要原材料按照一定的比例混合，并在专用的器具中搅拌均匀，制作成液。而制作而成的乳液还需要按照要求进行过滤、抽真空以及静置处理。
The first step: preparation of raw materials for production. Before producing PVC gloves, the ingredients need to be made first, which is to mix the main raw materials of the PVC gloves according to a certain proportion, and stir well in the special equipment to make the liquid. The produced emulsion also needs to be filtered, evacuated, and statically treated as required.
第二步：手摸粘附乳液，初步制作PVC手套。这一步骤的主要过程就是，将处理好的原料乳液用泵送入浸渍槽之中，同时，让手摸也进入浸渍槽，待手摸粘附了足够厚度的如何后，将手摸取出，并送入烘箱。必须要注意的是，手摸取出到进入烘箱之间的的一段时间内，手摸应该保持转到，以保证乳液在手摸上的均匀粘附。
The second step: hand touch emulsion and make PVC glove. The main process of this step is to send the processed raw material emulsion into the impregnated slot, and let the hand touch into the impregnated slot, and after the touch is enough, the hand will be taken out and sent to the oven. It must be noted that the hand touch should be kept in order to ensure the uniform adhesion of the lotion to the hand within a period of time between the hand and the oven.
第三步：PVC手套熟化成型。在手摸进入烘箱后，保持烘箱内温度在230℃至250℃之间佳。一定时间后，手摸上的乳液就会出现熟化现象，此时PVC手套就成型了。待PVC手套成型后，从烘箱内取出，使其自然冷却。至此，PVC手套已经基本制作造成了。
Third step: PVC gloves are well formed. After touching the oven, keep the oven temperature between 230 and 250 degrees. After a certain period of time, the lotion on the hand will become familiar, and the PVC gloves will be formed at this time. After the PVC gloves are molded, remove them from the oven and make them cool naturally. At this point, PVC gloves have been basically made.
第四步：PVC手套后期处理。后期处理工作包括了卷唇、沾粉、脱模、脱粉、质检、包装、入库等工作。
The fourth step: PVC glove post treatment. Post processing includes roll lips, powder, demoulding, powder stripping, quality inspection, packaging and warehousing.